WhatsApp: +86 19166273143 | emma.tan@tkbkl.com

About mold flow analysis

Moldflow analysis is a software simulation that shows how resin fills the mold during the injection molding process. By understanding material fill, injection mold designers can better locate gates, predict where bond lines will appear, and locate hard-to-fill locations in the mold.

Moldflow simulation software lets you solve plastic injection and compression molding problems. Advanced tools and a simplified user interface help you address manufacturing challenges such as part warpage, cooling channel efficiency and reduced cycle time.

Mold Flow Analysis software can simulate the flow of plastic in your proposed mold to improve mold design and produce high-quality parts—all before any machining is done on the tool! Allows designers to look into the future, showing them how plastic will fill the cavity of the mold and pointing out potential problems.

Everyone agrees that quality parts come from perfect molds, and the digital simulation process is the key to starting from perfect molds.

mold flow analysis LATEST PRODUCTS

Main Quality Control Procedures

TKB has independent quality control department to control every quality inspection step from incoming material, production process, assembly, packing, as well as cargo shipment. We have established quality evaluation program for each process to assure best quality and most professional service to our customers.
We carry out full inspection reports like monthly/seasonal/yearly quality analysis report, CPK, FAI, IQ, OQ, PC, PPAP, PFMEA etc.
1.DFM quality control
2.Mold flow quality control
3.Mold steel hardness check
4.Electrodes Inspection
5.Core and Cavity Inspection
6.Pre-assembly Inspection
7.Trial Report and Sample inspection
8.Production process quality control
9.OQC inspection

Supply Chain Support

Extended quality insurance from worldwide branded suppliers to insure good quality and after-sales service to your molds and molded parts.
Mold Steel suppliers: Assab, Bohler,Buderus,Daido,Finkl,Groeditz, Hitach, LKM Steel, Saartahl, Schmolz+bickenbach
Mold Base: LKM, Mingli
Hot Runner: DME, Incoe, Inglass, Mold Masters, Yudo, Hasco, Syventive, Husky
Hydro-Cylinder: Parker, HPS, Merkle
Plastic Materials: Dupont, Chimei, LG, Basf, Bayer, DSM,Borealis,Formosa.
Texture: Mold Tech Yicksang

நீங்கள் எப்போதும் பெறுவதை நாங்கள் உறுதி செய்வோம்
சிறந்த முடிவுகள்

அடிக்கடி கேட்கப்படும் கேள்விகள்

Date:2021-8-10

அடிக்கடி கேட்கப்படும் கேள்விகள்/ Frequently Asked Questions

 

 

As a plastic mold and injection molding company in China, we prepared answers for following most frequent asked queries for you, for more queries are always be here for you.

CONTACT US

CONTACT US

 

1. What info needed to get a correct mold quotation? How fast does it take to quote a project?

1)2D or 3D product drawing is needed for a mold quote;

2) If special requirement on mold steel, mold life, cavity quantity, hot runner requirement, part material, forecasted year quantity. Complete information will help to a most suitable cost effective, value added mold solution.

3) Normally take 2 working days to quote a new mold project seriously, and expedite quote is also available.

 

 

2. What’s the payment condition in TKB Mold?

1) New customer for mold: T/T 50% deposit, 50% against sample approval.

2) Mold modification: 100% upon sample approval.

3) Injection molding parts: 50% deposit, 50% before shipment.

4) VIP customer special terms: to be negotiated.

 

 

3. What’s the price terms/freight TKB mold will offer?

  • Normally TKB will offer ex-work TKB price for injection mold and plastic parts.
  • Free mold trial shotting samples free of charge and with freight to collect.
  • VIP customer special terms: to be negotiated.

 

 

4. What’s lead-time for a plastic mold and injection molding processes?

  • Injection mold lead-time counted from mold drawing approval and receipt of deposit to first mold trial(T1), and the difficulty of the molds determines how much time is needed, normally 20 to 60 days.
  • Injection molding lead-time counted from sample approval and receipt of deposit to production finish, order quantity determines how much time is needed, normally 7 to 15 days.

 

 

5. Will TKB send DMF to customer?

Yes,TKB Mold will send DFM (design for manufacturing) analysis and even mold flow analysis prior to the start of mold construction for customer review/approval.

 

 

6. Will TKB send mold design for approval?

After DMF approval, TKB will send the mould design for approval, and TKB will not start steel-cut before getting customers written approval of mold design.

 

 

7. How many plastic samples will be free provided?

TKB normally would provide 10~20 shots first mold trial shooting samples with gate(if have) free of charge according to the size of the parts, it would be freight to collect.

 

 

8. Which side provides plastic resin for injection mold trial?

TKB can provided plastic resin, if needed customer can provide the plastic resin the same.

 

 

9. How to make sure of quality before shipment?

shipment can be arranged only after TKB QC inspection PASS, or customer QC inspection PASS, or third-party inspection PASS if required. And TKB will always be there to provide full support.

 

 

10. How will TKB keep record of all mold data.

TKB will keep record of all final approved 2D, 3D mold drawing, modifications document, and send to customer for file to avoid future confusion in case engineering change is needed.

mold flow analysislatest blogs
மேலும் பார்க்க
சீனாவில் அச்சு உற்பத்தியாளர்கள்

எம்மா மூலம் 2022-10-14

Mold making is an important part of the manufacturing process of various products. In China, there are many mold manufacturers, and it is difficult to choose a suitable mold manufacturer according to ...
reverse injection mold

எம்மா மூலம் 2022-8-6

Reverse engineering replicates a product by performing a detailed inspection of its structure or composition. It tries to replicate a product or mold by taking all the original dimensions and recreati...
custom plastic molding

எம்மா மூலம் 2022-6-6

How Does Plastic Injection Moulding Work? Resin pellets are loaded into a barrel where they will eventually be melted, compressed, and injected into the mould’s runner system. Hot resin is shot into t...
China Mold Manufacturing Company

எம்மா மூலம் 2023-3-8

Mold manufacturing is the process of creating a mold, typically made of metal, that is used in various manufacturing processes, including injection molding, blow molding, and thermoforming. The mold i...
துல்லிய ஊசி மோல்டிங் நிறுவனங்கள்

எம்மா மூலம் 2022-10-25

Precision injection molding is a process by which a manufacturer produces plastic parts with very specific dimensions and tolerances. It is a critical process for many industries, and choosing the rig...
சீனாவில் தானியங்கி ஊசி அச்சு

எம்மா மூலம் 2023-2-22

உலகின் மிகப்பெரிய வாகன ஊசி அச்சுகளை உற்பத்தி செய்யும் நாடுகளில் சீனாவும் ஒன்றாகும், மேலும் இந்த பகுதியில் நிபுணத்துவம் பெற்ற பல நிறுவனங்கள் உள்ளன.இந்த நிறுவனங்கள் பரந்த அளவிலான வாகன ஊசிகளை வழங்குகின்றன.
injection molding service companies

எம்மா மூலம் 2022-11-25

Why Choose Plastic Injection Molding Process? Perhaps, people contemplate why they should opt for Plastic injection molding for their projects. We would say that there are various benefits of this pro...
ஊசி அச்சு வீடு

எம்மா மூலம் 2022-10-14

What is injection mold housing? Injection molding is a manufacturing process for producing parts from a variety of materials. Injection molding housings are often used to create enclosures for electri...
chinese mold

எம்மா மூலம் 2022-6-6

If your molds are for automotive parts or high-quality medical or cosmetic parts, I suggest finding some medium or large mold-making company, even if they quoted a high price. Because they always have...
chinese mold

எம்மா மூலம் 2022-7-22

Making an injection mold is all about machining raw metal blanks into parts with the required precision and then combining them together to form a complete mold. Some mold parts are movable, so during...
தொடர்பு கொள்ளவும்