பிளாஸ்டிக் ஊசி அச்சுகளை அசெம்பிள் செய்யும் போது முக்கிய புள்ளிகள்
Assembly process of plastic molding mold
Will complete all processing, in conformity with the relevant technical requirements of the drawings and passed the inspection of plastic die von berg systeme, structure and order of standard parts (standard mould base, etc.), part, according to the technical requirement of general assembly drawing and assembly process in order to cooperate one by one, modification, installation and orientation, after qualified through inspection and adjustment, the connection and fastening, The process of making it into an integral mold is called plastic mold assembly. The assembled mold is tested for the first time. After passing the test, small batch trial production can be carried out to further test the stability of the quality and reliability of the performance of the mold. If the problem is found in the mold test, or the problem is found in the sample inspection, it is necessary to carry out further adjustment and repair, until it fully meets the requirements, and the whole process of delivery of qualified commercial mold is called the plastic mold matching process.
When assembling plastic molds, pay attention to the following aspects:
1) Before assembly, the assembler should be familiar with the mold structure, characteristics and functions of each part and thoroughly understand the product and its technical requirements; Determine assembly sequence and assembly positioning datum as well as inspection standards and methods.
2) All molded parts and structural parts without exception should be qualified products confirmed by inspection. If there are some unqualified dimensions or parts of individual parts in the inspection, it must be confirmed by the die designer or the technical person in charge without affecting the performance and service life of the die; Assembly is not affected. Otherwise, the faulty part cannot be assembled. The standard parts and common parts purchased must also be finished products that have passed the storehouse inspection. Similarly, the unqualified ones cannot be assembled.
3) All parts and components of the assembly shall be cleaned and dried. Appropriate amount of lubricating oil should be applied during assembly if required. All tools required for assembly shall be clean, clean and dust-free.
4) The assembly and final assembly of the mold should be carried out on the flat and clean platform, especially the assembly of the precision parts should be carried out on the platform.
5) The parts assembly of interference fit (H7/ M6, H7/ N6) and transition fit (H7/ K6) should be carried out on the press, and the assembly should be in place at one time. When manual assembly is required without press, it is not allowed to use hammer to directly hit mold parts (clean wood square or board should be used), only wood or copper hammer can be used.
Keep following TKB MOLD blog, we will keep update more information about knowledge about mold assembly!
முந்தைய:ஊசி மோல்ட் பராமரிப்பின் முக்கியத்துவம்
அடுத்தது: ஊசி வடிவத்தின் பொதுவான எஃகு மற்றும் செயல்திறன் பகுப்பாய்வு
-
Revolutionizing the Electronics Industry: The Innovation of the Electronics Mold
2023-7-12
The electronics industry has witnessed remarkable advancements over the years, with technological innovations shaping th...
விபரங்களை பார் -
Injection Mold Components: Understanding the Basics
2023-6-4
Injection molding is a widely used manufacturing process in which melted plastic is injected into a mold cavity to form ...
விபரங்களை பார் -
Injection Mold: Streamlining the Manufacturing Process
2023-4-15
Injection molding is a manufacturing process that has revolutionized the way companies produce plastic products. It invo...
விபரங்களை பார் -
Exploring the World of Automotive Mold: Advancements and Innovations
2023-9-24
Introduction: The automotive industry has been witnessing rapid advancements and innovations in recent years. These adva...
விபரங்களை பார் -
Designing a High-Quality Plastic Bottle Crate Mold manufacture for Efficient Production
2023-7-15
Introduction Plastic bottle crates are essential in the transportation and storage of bottles across various industries,...
விபரங்களை பார் -
Creating High-Quality Aerospace Mold for Superior Performance
2023-5-12
The aerospace industry requires high-quality and precision parts to ensure superior performance and safety. Aerospace mo...
விபரங்களை பார்