About plastic injection mold tooling

Casting system; clamping guide mechanism; molding parts; exhaust mechanism; product launch and reset mechanism; side core pulling mechanism; mold heating or cooling system;
The injection mold design is based on the actual situation of the plastic parts, and the design is carried out according to the above structure. Design an injection mold that can actually produce a composite plastic injection molding process that meets the requirements of use.
What are the differences between plastic injection molds and die-casting molds?
Die-casting mold cores do not need quenching, because the temperature in the mold cavity exceeds 100 degrees during die-casting. Therefore, each molding time is equivalent to quenching once, and the mold cavity will become harder and harder. The general injection mold should be quenched above, and the cavity of the die-casting mold should be nitrided to prevent the alloy from sticking to the mold cavity. Due to the relatively large corrosion of the die-casting mold, some customers require the outer surface of the mold to be blued.

Productie van spuitgietmatrijs

WAAROM ZOU JE KIEZEN TKB Spuitgietmatrijzenbouw?

Uw spuitgietproductie maakt uw product van concept tot realiteit?

Uw spuitgietmatrijs met de ideale precisie vervaardigd?

Wilt u op maat gemaakte plastic mallen zonder flitsen en met een duurzame levensduur van de matrijs?

Then start mold manufacturing at TKB Mold, and let’s creat an ideal injection mold solution for your product.

Uitstekend technisch team voor exportmatrijzen

Rijke ervaring in vormvervaardiging

Geavanceerde productieapparatuur

Kwaliteitsborging van ISO9001: 2015-systeem

Snelle levertijd

Uitstekende service na verkoop

TKB-proces voor de productie van spuitgietmatrijzen

Om een export plastic spuitgietmatrijs van goede kwaliteit te maken, processen zoals hieronder voor uw referentie:

DFM-rapport, Mold Flow-analyse, conclusie 2D / 3D Mold-tekening, goedkeuring voor matrijsfabricage.

Mold steel preparation—Processing—Mold Base Processing—-Electrodes Processing—-Mold Parts Processing—-Quality Control—–Mold Fitting and Assembly—Inspection—-Mold Trial—Mass Production Trial—Inspection PASS—Pack and export the Mold

TKB-typen van kunststof spuitgietmatrijs

Aangezien kunststof spuitgietmatrijzen op grote schaal worden gebruikt voor veel industrieën, heeft TKB-vorm het voordeel om als volgt zeer nauwkeurige spuitgietmatrijzen te produceren:

Automotive Mold +

Medical Mold +

Electronics Mold +

Schimmel voor huishoudelijke apparaten +

Industrial Mold +

Aerospace Mold +

Overschimmel +

Precision Molds +

major mold applications

FAQ

Date:2021-8-10

FAQ/ Frequently Asked Questions

As a plastic mold and injection molding company in China, we prepared answers for following most frequent asked queries for you, for more queries are always be here for you.

NEEM CONTACT MET ONS OP

1. What info needed to get a correct mold quotation? How fast does it take to quote a project?

1)2D or 3D product drawing is needed for a mold quote;

2) If special requirement on mold steel, mold life, cavity quantity, hot runner requirement, part material, forecasted year quantity. Complete information will help to a most suitable cost effective, value added mold solution.

3) Normally take 2 working days to quote a new mold project seriously, and expedite quote is also available.

2. What’s the payment condition in TKB Mold?

1) New customer for mold: T/T 50% deposit, 50% against sample approval.

2) Mold modification: 100% upon sample approval.

3) Injection molding parts: 50% deposit, 50% before shipment.

4) VIP customer special terms: to be negotiated.

3. What’s the price terms/freight TKB mold will offer?

Normally TKB will offer ex-work TKB price for injection mold and plastic parts.
Free mold trial shotting samples free of charge and with freight to collect.
VIP customer special terms: to be negotiated.

4. What’s lead-time for a plastic mold and injection molding processes?

Injection mold lead-time counted from mold drawing approval and receipt of deposit to first mold trial(T1), and the difficulty of the molds determines how much time is needed, normally 20 to 60 days.

Injection molding lead-time counted from sample approval and receipt of deposit to production finish, order quantity determines how much time is needed, normally 7 to 15 days.

5. Will TKB send DMF to customer?

Yes，TKB Mold will send DFM (design for manufacturing) analysis and even mold flow analysis prior to the start of mold construction for customer review/approval.

6. Will TKB send mold design for approval?

After DMF approval, TKB will send the mould design for approval, and TKB will not start steel-cut before getting customers written approval of mold design.

7. How many plastic samples will be free provided?

TKB normally would provide 10~20 shots first mold trial shooting samples with gate(if have) free of charge according to the size of the parts, it would be freight to collect.

8. Which side provides plastic resin for injection mold trial?

TKB can provided plastic resin, if needed customer can provide the plastic resin the same.

9. How to make sure of quality before shipment?

shipment can be arranged only after TKB QC inspection PASS, or customer QC inspection PASS, or third-party inspection PASS if required. And TKB will always be there to provide full support.

10. How will TKB keep record of all mold data.

TKB will keep record of all final approved 2D, 3D mold drawing, modifications document, and send to customer for file to avoid future confusion in case engineering change is needed.