WhatsApp: +86 19166273143 | emma.tan@tkbkl.com

블로그

   
집 - 블로그 - Parts of an Injection Molding Machine

Parts of an Injection Molding Machine

Date: 2023-6-18
공유하다:

Injection molding is the process of manufacturing plastic parts by injecting molten plastic material into a mold. Injection molding machines are complex pieces of equipment that are used to produce a wide range of plastic products. In this article, we will discuss the various parts of an injection molding machine and their functions.

The Injection Unit

The injection unit is the first part of the machine that comes into contact with the plastic material. It is responsible for melting and injecting the plastic into the mold. The injection unit is comprised of the following components:

1. Hopper: The hopper is the container that holds the plastic material. It is typically located above the injection unit.

2. Screw: The screw is a long, rotating cylinder that moves the plastic material from the hopper to the injection unit. The screw also heats the plastic material by friction as it rotates.

3. Barrel: The barrel is the stationary cylinder that surrounds the screw. It is heated by external heaters to maintain the plastic material in a molten state.

4. Nozzle: The nozzle is the part of the injection unit that connects the barrel to the mold. The plastic material is injected through the nozzle into the mold.

5. Check Ring: The check ring is a component that ensures that the plastic material flows in the right direction and pressure is maintained.

The Clamping Unit

The clamping unit is responsible for opening and closing the mold. It also applies pressure to the mold during the injection process. The clamping unit is comprised of the following components:

1. Mold: The mold is the part of the machine that is shaped like the desired plastic part. It is comprised of two parts, the mold core and the mold cavity.

2. Clamp Plate: The clamp plate holds the mold in place during the injection process. It is attached to the movable platen.

3. Movable Platen: The movable platen moves back and forth to open and close the mold.

4. Fixed Platen: The fixed platen is the stationary part of the clamping unit. It holds the mold in place during the injection process.

5. Tie Bars: The tie bars are the metal rods that connect the movable platen to the fixed platen. They ensure that the mold remains closed during the injection process.

6. Ejector Pins: The ejector pins are used to remove the finished plastic part from the mold cavity.

 

 

The Control Unit

The control unit is the brain of the injection molding machine. It is responsible for monitoring and controlling the various components of the machine to ensure that the plastic part is produced correctly. The control unit is comprised of the following components:

1. Hydraulic System: The hydraulic system is responsible for providing the energy required to operate the clamping unit and injection unit. It consists of a hydraulic pump, motor, and cylinder.

2. Electrical System: The electrical system is responsible for controlling the various components of the machine. It consists of a programmable logic controller (PLC) and various sensors.

3. User Interface: The user interface is the part of the machine that the operator interacts with. It consists of a touch screen display and various buttons and switches.

In conclusion, an injection molding machine is a complex piece of equipment that is used to produce a wide range of plastic products. It is comprised of three main parts: the injection unit, the clamping unit, and the control unit. Each of these parts is comprised of various components that work together to ensure that the plastic part is produced correctly.

이전의:

다음:

최근 소식

연락하다