injection water purifier mold
In the early stage of the design of the injection mold for the end cover of the water purifier, the feasibility analysis of each characteristic element of the plastic part is firstly carried out to determine the molding material, the opening direction and the parting surface. Secondly, carry out the structural design of injection mold gating system, ejection system and cooling system. The large end face of the plastic part will shrink, which can reduce the glue; increase the sprue angle and side gate to obtain good fluidity, avoid welding marks and cold material; in order to better push out the plastic part, the ejector pins under 2mm are all made into support pins , The fixed mold is designed with a pin, and the movable mold side is designed to move; the cooling system is designed as a symmetrical circulating water circuit to ensure the mold temperature.
이전의:칫솔 사출 금형
-
Injection Molding Parts: A Comprehensive Guide
2023-4-23
Injection molding is a popular manufacturing process used to produce a wide range of plastic parts for various industrie...
세부 정보보기 -
Creating a High-Quality Plastic Injection Crate Mold for Efficient Storage Solutions
2023-10-4
Introduction Plastic injection molding has revolutionized the manufacturing industry by providing efficient and c...
세부 정보보기 -
Creating Massive Plastic Molds: A Comprehensive Guide
2023-10-25
Introduction The world of manufacturing has witnessed a transformative evolution with the advent of advanced technologie...
세부 정보보기 -
2023-5-2
Plastic molds are essential in the manufacturing of various products, from toys to automotive parts. The process of crea...
세부 정보보기 -
Large Plastic Molds for Your Manufacturing Needs
2023-5-2
Large plastic molds are essential components in the manufacturing industry, providing a way to mass-produce products wit...
세부 정보보기 -
의료용 사출 금형이란 무엇입니까?의료용 사출 금형을 선택하는 이유는 무엇입니까?
2022-12-2
의료 분야에서 의료용 사출 성형 제품은 환자의 안전을 유지하는 데 중요한 역할을 합니다.
세부 정보보기