噴射浄水器金型
In the early stage of the design of the injection mold for the end cover of the water purifier, the feasibility analysis of each characteristic element of the plastic part is firstly carried out to determine the molding material, the opening direction and the parting surface. Secondly, carry out the structural design of injection mold gating system, ejection system and cooling system. The large end face of the plastic part will shrink, which can reduce the glue; increase the sprue angle and side gate to obtain good fluidity, avoid welding marks and cold material; in order to better push out the plastic part, the ejector pins under 2mm are all made into support pins , The fixed mold is designed with a pin, and the movable mold side is designed to move; the cooling system is designed as a symmetrical circulating water circuit to ensure the mold temperature.
次： 射出成形部品
-
Creating a Top-Notch Plastic Big Crate Mould: Mastering the Art of Precision and Durability
2023-7-4
In the world of plastic manufacturing, the creation of high-quality and durable products is a constant pursuit. One such...
詳細を見る -
-
2023-2-24
Ensuring quality control is a critical aspect of the plastic part molding process. Here are some key steps to ensure con...
詳細を見る -
Injection Molding Service: The Key to Efficient and Cost-Effective Production
2023-6-1
Injection molding is a manufacturing process used to produce a wide range of plastic products. It is a highly efficient ...
詳細を見る -
Gate Injection Molding: Revolutionizing the Manufacturing Industry
2023-7-4
Introduction: Gate injection molding is a groundbreaking manufacturing technique that has revolutionized the way product...
詳細を見る -
Plastic Molds: Essential Tools in Industrial Manufacturing
2024-10-19
Plastic molds play an important role as key equipment in the production of plastic products. The following is a detailed...
詳細を見る