About mold plastic maker

Classification of injection molds:
According to the molding process: hot work mold and cold work mold

According to molding materials: metal molds and non-metal molds

Divided by production volume: sample mold (simple mold) and mass production mold

Divided by mold material: soft mold and hard mold

2. Mold types classified by molding materials:

Metal material molds are divided into casting molds, die-casting molds, stamping molds (bending, punching, blanking, stretching, shaping, flanging, etc.), forging molds (hot forging, cold heading, rolling, drawing, extrusion, etc.), powder metallurgy mold (isostatic pressing powder metallurgy, metal injection molding powder metallurgy, powder forging powder metallurgy, pressure sintering powder metallurgy), etc.

Non-metal material molds are divided into plastic molding molds (extrusion molding, blow molding, injection molding, compression molding, gas-assisted, vacuum suction molding, etc.), rubber molds, glass molds, ceramic molds, powder metallurgy molds (PTFE), etc.

Pretreatment of raw materials or inserts (not all raw materials or inserts require pretreatment – drying, preheating, depending on the degree of product technical requirements, type of raw materials, temperature conditions, for metal inserts, generally need to be pretreated in winter hot.)

Pay attention to the raw material drying (baking) process.

There must be clear drying process documents and operating procedures.

Detection and control of moisture content before injection molding.

The baking material equipment has a status mark and the equipment is in good condition.

The records of raw materials entering and leaving the warehouse are clear and clear, and are implemented in accordance with regulations without confusion.

Moisture-proof conditions during the use of raw materials after baking and during turnover (turnaround packaging and temporary storage conditions in the factory).

FAQ

Date:2021-8-10

FAQ/ Frequently Asked Questions

As a plastic mold and injection molding company in China, we prepared answers for following most frequent asked queries for you, for more queries are always be here for you.

1. What info needed to get a correct mold quotation? How fast does it take to quote a project?

1)2D or 3D product drawing is needed for a mold quote;

2) If special requirement on mold steel, mold life, cavity quantity, hot runner requirement, part material, forecasted year quantity. Complete information will help to a most suitable cost effective, value added mold solution.

3) Normally take 2 working days to quote a new mold project seriously, and expedite quote is also available.

2. What’s the payment condition in TKB Mold?

1) New customer for mold: T/T 50% deposit, 50% against sample approval.

2) Mold modification: 100% upon sample approval.

3) Injection molding parts: 50% deposit, 50% before shipment.

4) VIP customer special terms: to be negotiated.

3. What’s the price terms/freight TKB mold will offer?

Normally TKB will offer ex-work TKB price for injection mold and plastic parts.
Free mold trial shotting samples free of charge and with freight to collect.
VIP customer special terms: to be negotiated.

4. What’s lead-time for a plastic mold and injection molding processes?

Injection mold lead-time counted from mold drawing approval and receipt of deposit to first mold trial(T1), and the difficulty of the molds determines how much time is needed, normally 20 to 60 days.

Injection molding lead-time counted from sample approval and receipt of deposit to production finish, order quantity determines how much time is needed, normally 7 to 15 days.

5. Will TKB send DMF to customer?

Yes，TKB Mold will send DFM (design for manufacturing) analysis and even mold flow analysis prior to the start of mold construction for customer review/approval.

6. Will TKB send mold design for approval?

After DMF approval, TKB will send the mould design for approval, and TKB will not start steel-cut before getting customers written approval of mold design.

7. How many plastic samples will be free provided?

TKB normally would provide 10~20 shots first mold trial shooting samples with gate(if have) free of charge according to the size of the parts, it would be freight to collect.

8. Which side provides plastic resin for injection mold trial?

TKB can provided plastic resin, if needed customer can provide the plastic resin the same.

9. How to make sure of quality before shipment?

shipment can be arranged only after TKB QC inspection PASS, or customer QC inspection PASS, or third-party inspection PASS if required. And TKB will always be there to provide full support.

10. How will TKB keep record of all mold data.

TKB will keep record of all final approved 2D, 3D mold drawing, modifications document, and send to customer for file to avoid future confusion in case engineering change is needed.