WhatsApp : +86 19166273143 | emma.tan@tkbkl.com

Blog

   
Maison - Blog - Engineering Injection Mold Design: A Comprehensive Guide

Engineering Injection Mold Design: A Comprehensive Guide

Date: 2023-5-30
Partager:

Injection molding is a popular manufacturing method used in mass production of plastic parts. The process involves injecting molten plastic into a mold cavity where it cools and solidifies. The mold design plays a crucial role in the success of the injection molding process. A well-designed mold ensures consistent part quality, high production rates, and reduced manufacturing costs. In this comprehensive guide, we will discuss the essential aspects of engineering injection mold design.

Part Design

The first step in injection mold design is part design. The part design determines the shape, size, and features of the final product. The designer needs to consider various factors such as the intended use of the part, material selection, and dimensional tolerances. The designer also needs to ensure that the part design is suitable for injection molding. Features such as undercuts, threads, and sharp edges may cause molding defects or make the part difficult to demold.

Draft Angle

The draft angle is the angle between the mold wall and the part surface that allows for easy ejection from the mold. A draft angle of at least 1-2 degrees is recommended for most injection molded parts. Parts without draft angles may stick to the mold and result in damage to both the part and the mold.

Wall Thickness

Wall thickness is an essential parameter in injection mold design. A uniform wall thickness ensures consistent part quality and reduces warpage and sink marks. The designer needs to consider the material properties and part geometry when selecting the wall thickness. Thick walls may cause sink marks, while thin walls may cause warpage and dimensional instability.

Gate Design

The gate is the point where the molten plastic enters the mold cavity. The gate design affects the part quality, cycle time, and production cost. The designer needs to select the gate location, size, and shape based on the part geometry and material properties. Common gate types include the edge gate, the sub gate, and the hot runner gate.

Mold Core and Cavity

The mold core and cavity are the two halves of the injection mold that form the part shape. The designer needs to ensure that the mold core and cavity are accurately machined and fit together tightly. A misaligned mold may cause flashing, parting line defects, and dimensional instability. The designer also needs to consider the mold material selection and surface finish to ensure consistent part quality and reduce mold wear.

 

 

Ejector Pins

Ejector pins are used to push the part out of the mold after it cools and solidifies. The designer needs to select the ejector pin location, size, and number based on the part size, complexity, and demolding force. The ejector pins should be placed in areas that do not affect the part appearance or function. Improper ejector pin design may cause part deformation or damage.

Venting

Venting is the process of allowing the air to escape from the mold as the molten plastic enters the cavity. Poor venting may cause air traps, which result in voids and part defects. The designer needs to select the venting location and size based on the part geometry and material properties. The venting should be placed in areas that do not affect the part appearance or function.

Conclusion

Engineering injection mold design is a complex process that requires careful consideration of various factors. A well-designed mold ensures consistent part quality, high production rates, and reduced manufacturing costs. The designer needs to consider factors such as part design, draft angle, wall thickness, gate design, mold core and cavity, ejector pins, and venting. With proper design and fabrication, injection molding can produce high-quality plastic parts that meet the customer\’s specifications.

Mots clés:

Précédent:

Suivant:

Dernières nouvelles

Contact