WhatsApp: +86 19166273143 | emma.tan@tkbkl.com

Blog

   
Hogar - Blog - How to operate plastic insert molds correctly

How to operate plastic insert molds correctly

Date: 2024-6-21
Cuota:

In the plastic manufacturing industry, proper operation of plastic insert molds is essential to ensure product quality, improve production efficiency, and ensure equipment safety. The following will introduce in detail how to operate plastic insert molds correctly to ensure the smooth running of the production process.

1. Preparation before operation

Check the mold: Before operation, the mold should be fully inspected, including the integrity, cleanliness and tightness of each component. Make sure that the mold is not damaged, rusted or deformed, and remove dirt and oil stains from the mold surface.

Preheat the mold: Preheat the mold according to the plastic material used and mold design requirements. Preheating helps the plastic flow evenly in the mold and improves product quality.

Prepare raw materials: Prepare the required plastic raw materials, make sure the raw material quality meets the requirements, and mix them in the specified ratio.

2. Precautions during operation

Mold closing operation: Before closing the mold, make sure that the positioning pins and guide columns of the mold and other components are in the correct position to avoid mold misalignment. Pressure should be applied evenly during mold closing to avoid damage to the mold due to uneven force.

Injection Molding Operation: During injection molding, injection pressure and speed should be controlled to ensure that the plastic flows evenly in the mold and fills the entire cavity. At the same time, attention should be paid to mold venting to avoid bubbles or defects.

Holding Pressure and Cooling: After injection molding is completed, a holding time should be maintained to allow the plastic to solidify completely in the mold. Appropriate cooling treatment should then be applied to allow the plastic to reach the specified hardness and dimensional stability.

Opening the mold and removing parts: After cooling is completed, the mold can be opened. When opening the mold, the mold locking mechanism should be opened first, and then the mold should be opened slowly. Special tools should be used to remove the parts to avoid damage to the mold.

3. Cleaning and Maintenance After Use

Clean the mold: After each use, the mold should be cleaned to remove residual plastic and oil. Special cleaning agents and tools should be used for cleaning to avoid corrosion or damage to the mold.

Inspection and Maintenance: Inspect and maintain the mold on a regular basis, including checking mold wear, fastener tightness, and lubrication. Any problems found should be corrected in a timely manner to ensure normal use of the mold.

4. Safety Precautions

Follow the operating procedures: During operation, the operating procedures and safety regulations should be strictly followed to ensure the safety of yourself and the equipment.

Wear protective equipment: During operation, safety glasses, gloves, and other protective equipment should be worn to avoid injury from splashing plastic particles or other objects.

Observe fire prevention: Plastic raw materials and products are flammable items, so during operation, attention should be paid to fire prevention to avoid fire accidents.

The correct operation and maintenance of the above steps can ensure the stable operation of the plastic insert mold and improve the product quality. At the same time, it also helps to prolong the service life of the mold and reduce production costs.

Anterior:

Próximo:

Últimas noticias

Contacto